AKV2 / AKV4
Stainless steel,
four sizes.
The same design principle as the polycarbonate series, only in a stainless steel enclosure: for environments where plastic is not an option — chemical industry, coastal areas, food industry, public spaces with an increased risk of vandalism.
Drag to turn.
Stainless steel where polycarbonate is no longer an option: four sizes from 400 × 400 to 500 × 500 mm, wall or pole, IP 66 and IK 10.
What sits
behind the door.
Brushed stainless steel
Enclosure and door in stainless steel — 1.4301 for the AKV2, 1.4404 or 1.4571 for the AKV4 —, brushed and sealed to IP 66. The unit shown closes with a swing handle and a lock cylinder.
Switch and fibre
A DIN-rail switch from barox with PoE++, four RJ45 ports and two SFP slots, beside it the coupler panel with six positions for the optical fibre. The choice runs from the unmanaged four-port barox unit up to the Layer 3 device with eight ports and PoE++ at 90 W.
Power, even when the mains fails
This unit is built with a UPS: a SITOP PSU100S turns 230 V into 24 V, the SITOP UPS1600 DC UPS holds it with its battery module, and a DDR-240B-48 makes 48 V at 240 W from it. In the catalogue: 48 V DC at 120, 240 or 480 W.
Arresters for the camera lines
The Ethernet lines run through surge arresters, three DEHNpatch units for RJ45 in this unit. They are IEEE 802.3 compliant and usable up to 4PPoE; up to four fit in the box.
The mains side
The supply lands on the X1 terminals, behind them sits a type 2 surge protector. To the left an enclosure heater rated 20 W.
Installation location
Wall and pole
Outdoors on a wall or pole, up to 300 mm diameter.
Technical data
Series AKV2 / AKV4 · figures per the ETEC product catalogue. Equipment depends on configuration.
- External dimensions
- 400 × 400 × 210 mm · 500 × 400 × 210 mm · 500 × 500 × 210 mm · 500 × 500 × 250 mm
- Type code
- (44) 400 × 400 · (54) 500 × 400 · (55) 500 × 500 mm · (W) wall with brackets · (M) pole, entries at the bottom · (Ma) pole, entries in the rear panel
- Enclosure
- Stainless steel — AKV2: 1.4301 · AKV4: 1.4404 or 1.4571
- Finish
- Brushed, custom paint finish available
- Mounting plate
- Steel, galvanised
- Protection rating
- IP 66 · IK 10
- Temperature range
- −40 to +80 °C
- Cameras
- 2 to 6 IP cameras
- Power supply
- 48 V DC · 120 W (2.5 A), 240 W (5 A) or 480 W (10 A)
- Output voltage
- 48 to 55 V DC adjustable
- Supply
- 90–264 V AC / 127–370 V DC
- Door
- Hinged
- Mounting
- Wall brackets V2A · mast bracket with 2 V2A clamping bands, pole up to Ø 300 mm
- Options
- UL certification · thermal insulation · flange plate at the bottom
Is the AKV2 / AKV4 right
for your site?
Tell us the number of cameras, the mounting type and the transmission — we check it and configure the box.
Hanauerstraße 15 · 75181 Pforzheim · Mon–Fri 9 am–5 pm